Drinking water is all water, in the original condition or after dressing which is determined in order to drink, for cooking, for the preparation of food and beverages or for the following other domestic purposes.

  This is considered of spit of the origin of the water, it?s aggregate state and in spite of that whether is it determined for the supply and routings, in tank tucks, in bottles or other containers.

  Drinking water for the human use must be suitable for pleasure from pathogens freely, and be pure.

  In the water for the human use pathogens may not be contains in concentrations which allow procure a damage of the human health.

  The drinking water is supplied by the waterworks in the legally prescribes quality according to the drinking water regulation up to delivery place in the building. In big buildings, like hospitals, sports facility, nursing homes, hotels, industrial plants etc., with partly big administration systems, exists the danger of a contamination of the water with pathogenic germs.

  And endangering for the drinking water quality exists in to big administration cross sections with stagnating water, at the withdrawal place germinate back (e.g. give shower) badly or not isolated pipes (cold installation or warm water installation) dead ropes or only very rarely used installation parts. Moreover, rough environment in tubes favour the settlement of the pipes with water-usual micro-organisms.

  In this areas almost ideal temperature conditions >20 °C exist frequently. Together with deposits from lime and corrosion the best presupposition are that to the formation of a biofilm. The pathogens often settle in biofilm (as for examples salmonella, even legionella, E. Coli, coliforme germs, faekal-streptokokken, pseudomonas etc.) load the drinking water and with it the consumer. It is a matter the water consumers as for example hotel guest of protecting patients, sportsmen, old people home inhabitants, assistants etc. against the danger by hygienically dubious drinking water with suitable measures.

  The responsibility for the hygienically perfect state of drinking water in the house installation in accordance with the industrialist / owner or one of him representative. This must guarantee the quality of the drinking water in all water pipes (house installation) of "his" building from the delivery place (water meter) up to the point of the water withdrawal for the human use.

  The Multi-Layer-Convert- System is the result from a research work of many years and development.

  This system is applicable individually in all areas in which hygiene, desinfection and smell destruction are wished. This procedure causes the electro-chemical- physical activation of water and salt.

  In this connection, on the basis of electrolytic processes the input materials water and salt are disassembled in two anodes and cathodes chambers seperated by a special diaphragm of each other temporarily. In this way four become at the same moment, very highly competitive oxidants developed, namely:

  The basis from aqua-convert is a Multi-Layer-Converter. With this special Converter it was only possible to produce a disinfectant with four named components.

  The cooperation these four oxidants - free chlorine, hydrogene peroxide, oxygen and ozone - cares for the extremely high disinfection effect from Aqualit.

  Aqualit corresponds to the regulations to the disinfection of drinking water and bath water.

  To the production of Aqualit diaphragm procedures is German Institute for "DIN" fair. Therefore, exist no reflections, taking into account the relevant regulations, against the application from Aqualit the disinfection of drinking water and bath water.

  The default of the drinking water regulation and the German Institute for DIN 19643 with regard to the disinfection components in the water, becomes with an measuring and control technology supervises and steered.

  Aqualit can in a lot of areas of the water disinfection, are applied in the nursing area and living area, as well as in the industry.

  For example:

  Drinking water and industrial water

  The aqua-convert technology is a new and independent system to the production of a disinfectant only from water and salt. In the range of application of the drinking water disinfection the fundamental unit aqua-convert is supplemented with the required dosage together with a measuring and control technology.

  Core element of the aqua- convert- technology is extremly high-quality Multi- Layer- Convent (MLC) with different noble metal coatings and a special diaphragm.

  A simple solution to common salt and water is disassembled eletric-physical.

  Besides, the disinfectant Aqualit with the active substances appears in the anode chamber: free chlorine, oxygen, ozone, and hydrogene peroxide.

  In the cathode chamber appears Redolit, a weak lye.

  The characteristic of the MLC technology in the high quality diaphragm and the division conditional thereby of anodes and cathode party. The products of both chambers are brought together not in a solution, but also remain after resignation from the MLC-building group strictly seperated and can unfold so your full effect.

  The diaphragm is permeable only for certains ions. With it the so important electric-physical division and fragmentation of the used brine is only possible. From this quite special reason the MLC technology is not comparably with the simple electrolysis to the production of a disinfectant.

  The modular construction and the possible combination of this investment technology offers the most various application possibilities to the successful water treatment.

  The production of the Aqualit solution in a supply reservoir has the inestimable advantage that this disinfectant is available at the same moment for different ranges of application.

  It can therefor from the supply reservoir of an aqua-convert plant the disinfection for the e.g. cold water inlet, the warm water cycle and the same moment for the air-conditioner be inferred. Then the aqua-convert device must be supplemented only with the respective dosage with measuring and control unity for the observance of the limit values.

  With the investment sum is substantially reduced opposite single solutions. In different industrial operationals areas and e.g. also to swimming-pools the reproach is indispensable in disinfection for need tops.

  In a lot of old buildings the water works are not isolated only in completely. Old isolation materials have disintegrated. Not later then but in the taking out place cold water and warm water is mixed, i.e. treated with untreated water. If only one of these water systems is disinfected the disinfection are diluted possibly bye the mixture of the untreated water ( so that without depot) such that a reliable disinfection is hardly given. Also immigrating from germs become water-usual rarely or not more to used plumping parts in untreated net areas rescues the danger of the disgermination of withdrawal places. Farther a sufficient protection is not guaranteed against the recontamination in the water supply.

  In this example you see a concept aqua-convert and measuring equipment separated. The reservoir size can be chosen according to demand, also for bigger depots, freely.

  The best possible disinfection result and the greatest possible protection for the water consumer by the water treatment in the cold water inflow and, in addition, in the WW circulation with Aqualit